A cycling thermostat is normally on the lover property or just underneath the lint filter place, on the blower wheel housing or inside the venting/exhaust system. A dryer thermostat is normally oval shaped and about an inch and a half in length. The thermostat includes a bimetal that opens and closes a pair of contacts depending on the heat inside the dryer.
Some dryers might have as many as five thermostats - one for all the various heat cycles. The temperature placing or period picked determines which thermostat is employed to regulate the heat. If your dryer is malfunctioning on the low heat setting, the thermostat for that particular placing might be defective. The biking thermostat is usually found in the path of the air causing the drum.
The hi-limit thermostat safeguards your dryer from overheating. That thermostat is generally found on the heat factor, housing, or cage assembly. If the circulation in the dryer becomes blocked with a plugged or improperly installed vent, bad drum closes, or a defective blower, the high-limit thermostat pieces power to the heating element. What this means is you will find different issues along with your dryer. alarm.com smart thermostat
Together with thermostats, dryers use thermal fuses as a security device. Some dryer versions might have two thermal fuses to detect serious heat. The thermostats for the large and moderate heat options are not the problem. But, if the dryer is not working properly for a lot of the heat adjustments, it's probably an issue with your port as opposed to the thermostats.
If the hi-limit thermostat doesn't cut capacity to the heat aspect and the element gets also warm, the thermal fuse produces and reductions all capacity to the dryer. This might show that a thermostat is faulty or anything is improper together with your ventilation duct, filters, closes, or blower. You can't reset thermal fuses so once they hit they must be replaced.
Have a review of your dryer's manual for the places of its thermostats. It's strange for a dryer's thermostat to continue functioning at a different heat than initially supposed and the only method to test for this would be by examining the temperature of the exhaust. You can do that by putting a pocket thermometer inside the exhaust vent. This check is completed with the dryer working, so be exceptionally careful.
