Gold leafing or gilding, is a questionnaire of art that reaches back into record for hundreds of years. Traditionally, the process did not require the utilization of fluid silver paints. Musicians during record applied gold sheet that has been made from 23 or 24 carat gold. In the current world of guilding, the expense of real gold will make the hobby totally also expensive.
So we use a cheaper method that creates an ideal simulation of the classic artwork of gold leafing. Schlagmetal, which is also sometimes known as structure leaf is comprised of 85% copper and 15% zinc. It is available in packs of 25 sheets. Each page is interleaved with muscle and methods 140mm by 140mm. Though there is no silver utilized in this edition of guilding, the result is really a similarity that's exactly the same ソフト闇金.
The key is to make sure the material is closed before utilizing it otherwise the copper may tarnish. Planning the top suggests to ensure it is clear, smooth, and dry. Which means that any polish, dust, or oil should be removed else the leafing will not bond to the outer lining properly. Using fine sand paper, mud out any bumpy ridges in your surface.
If the top is porous, it should be covered and allowed to dried completely. Following drying the surface may be sanded using 220 resolution sandpaper. The target is to create a smooth, actually surface. Nowadays, engineering has replaced the previous gas centered size and wax with easier to use water based acrylic products. The Bottom Coat: Employing a brush apply the Basic Venetian Red "Silver Leaf Base-coat" to the surface and let to dry.
Use the Adhesive Measurement: After the bottom coat is dry, use the "Traditional Silver Leaf Glue Measurement" in a thin, also layer. Use the Leaf: Carefully apply the structure "Traditional Silver Leaf" to the surface while carrying cotton gloves. If they are inaccessible make fully sure your arms are clean by washing them and drying them.
Use a 50mm comb as a dabber to position the steel leaf onto the adhesive. That is most effective if the brush is held vertically. Overlapping the leaf is acceptable. Use sterile cotton or one of many interleaved blankets of tissue, to tamp the leafing into place. If you have spaces, cover those with a small area of leafing. Tamp with the cotton, never with your hands.
